Rear projection after hours in the gallery
Rear projection after hours in the gallery
Here's an idea I've been thinking about:
After hours, pull a white sheet down over the gallery windows, and project images onto it from a slide projector in the gallery.
This could present a very large, vivid, glowing and high-resolution image (much higher than with a digital projector) to passers-by on the street by night. It could be set up on a timer to rotate images in a sequence.
The shape of the window is a near-perfect match for a 35mm slide in landscape format. We would need to get a wide angle lens for the slide projector to cover the whole window, and might need to modify the projector somewhat to get something bright enough with sufficient bulb life, but I have some ideas for that.
This setup could run in parallel with daytime exhibitions in the gallery. It could be used for exhibiting photography directly, or to project images of other art works, e.g. to blow up and draw attention to items from the running exhibitions that people can then return to view in the daytime.
After hours, pull a white sheet down over the gallery windows, and project images onto it from a slide projector in the gallery.
This could present a very large, vivid, glowing and high-resolution image (much higher than with a digital projector) to passers-by on the street by night. It could be set up on a timer to rotate images in a sequence.
The shape of the window is a near-perfect match for a 35mm slide in landscape format. We would need to get a wide angle lens for the slide projector to cover the whole window, and might need to modify the projector somewhat to get something bright enough with sufficient bulb life, but I have some ideas for that.
This setup could run in parallel with daytime exhibitions in the gallery. It could be used for exhibiting photography directly, or to project images of other art works, e.g. to blow up and draw attention to items from the running exhibitions that people can then return to view in the daytime.
So, I bought a nice 45mm lens for the projector and tested it out tonight, it fills the window perfectly from the back of the room. The next thing we need is thin white sheets to make a screen out of. It would be best to put joins in the same place as the window frame so we would need 3 x 120x200cm sheets. I'll see what I can get from Edinburgh Fabrics next time I get the chance.
We also need to give some thought to how the screens can be put up and taken down easily. It is probably easiest to set them up like pull-down/roll-up blinds, for which we'd need some parts from Homebase or B&Q or something.
Finally we'll need a stand for the projector which can be wheeled in and out of the gallery easily at the start/end of the night. Do we have a projector stand already somewhere? I have a vague memory of one maybe.
Is anyone keen on this project that wants to volunteer to help me finish it? I'm tangled up in a lot of stuff at the moment and it'll happen sooner with a second pair of hands.
Finally we'll need a stand for the projector which can be wheeled in and out of the gallery easily at the start/end of the night. Do we have a projector stand already somewhere? I have a vague memory of one maybe.
Is anyone keen on this project that wants to volunteer to help me finish it? I'm tangled up in a lot of stuff at the moment and it'll happen sooner with a second pair of hands.
I know roughly how to make roman blinds. You sew rings on the back of the material, attach strings to the bottom, run them through the rings to the top and then along and down one side, where you pull.
We would need a bit of beading the length of the window for the bottom.
Can the projector be mounted on the roof of the volunteer cupboard, so it doesn't need to be moved every day? Or do the angles not work?
We would need a bit of beading the length of the window for the bottom.
Can the projector be mounted on the roof of the volunteer cupboard, so it doesn't need to be moved every day? Or do the angles not work?
Could it be set up like a projection room with a hole(possibly glazed) on the wall opposite the window? I think this would put the projector in the volunteer cupboard corridor or in the volunteer toilet. It would save having to move the projector about. We could ask that no art work was hung in front of the hole!
- martinmckenna
- Posts: 2714
- Joined: Thu Jun 28, 2007 7:26 pm
- Location: insitu
- Contact:
Hi guys . i think that this really should be discussed at the visual arts working group meeting which is 7pm thursday . i personaly feelings is that any thing that gets in the way of running of gallery is a no no for me .eg a hole in wall that would inform how the space is used for art. .
also sometimes there will be installions in there so a free standing projector would posbblity get in the way . If there is going to be a blind then it should look tidy , maintining the white space as it is currently . My other concern is if the gallery will be put back to normal everyday..
also sometimes there will be installions in there so a free standing projector would posbblity get in the way . If there is going to be a blind then it should look tidy , maintining the white space as it is currently . My other concern is if the gallery will be put back to normal everyday..
Okay, further progress: I have bought 450x250cm of white sheeting from Edinburgh Fabrics, it is currently in a bag just through the hatch above the disabled loo. We can test with a full image tonight.
A hole is a good idea, much better than having to wheel the thing in and out. I'd avoid glazing it but rather just have a white cap that could be stuck over it during the day.
A hole is a good idea, much better than having to wheel the thing in and out. I'd avoid glazing it but rather just have a white cap that could be stuck over it during the day.
i agree with M.M. in terms of consulting the WG and ensuring the presentation of the gallery remains at it's current high.
r
r
-----
www.ryanvanwinkle.com
www.ryanvanwinkle.com
I agree that this is something for the VA WG to make a decision on, I can see how the hole could cause problems. Another idea would be for the projector to sit above the back wall of the Gallery and for the image to be projected using a moveable periscope arrangement which could be put in place when required and moved out of the Gallery space when not required.
I should put in that there's no need for this to go in as a permanent fixture. It would still be cool to do as a project in the gallery in its own right. In which case as soon as the basic setup is tested (best done now whilst the gallery is empty), it could be stored away until it's wanted for a show.
However, if it's possible to set up permanently without disturbing the normal usage of the gallery then that would be cooler.
If we used a hole it would be about 10cm diameter and could have a cover made from the cut out section, to maintain the wall surface.
However, if it's possible to set up permanently without disturbing the normal usage of the gallery then that would be cooler.
If we used a hole it would be about 10cm diameter and could have a cover made from the cut out section, to maintain the wall surface.
Tested with a full screen tonight. This is how it looked, with a random image of a mural from the carousel that was in the projector.
Very contrasty images like this seem to work okay, but the image isn't really bright enough for general photography as stands.
Very contrasty images like this seem to work okay, but the image isn't really bright enough for general photography as stands.
You do not have the required permissions to view the files attached to this post.
So, this is probably the best we can do economically as a system that could run parallel to a daytime exhibit.
As a dedicated exhibition, there are some improvements that could be made:
Firstly, blackout curtains could be hung inside the room to stop light reflected around inside the room from coming through the screen. The brightness would remain the same but as you can see from the image, the real problem is not so much the bright areas as that the blacks are just not black enough. (Actually, it might be possible to do this for a foldaway system too - just have black blinds that come down over the walls as well as a white one for the window)
For more brightness, we could use all three projectors, each one lighting up one window pane and displaying a portrait format image. With each running on a separate, out of sync timer, this could make for an interesting effect and would also remove the issue of the window frame interrupting the composition of images.
As a dedicated exhibition, there are some improvements that could be made:
Firstly, blackout curtains could be hung inside the room to stop light reflected around inside the room from coming through the screen. The brightness would remain the same but as you can see from the image, the real problem is not so much the bright areas as that the blacks are just not black enough. (Actually, it might be possible to do this for a foldaway system too - just have black blinds that come down over the walls as well as a white one for the window)
For more brightness, we could use all three projectors, each one lighting up one window pane and displaying a portrait format image. With each running on a separate, out of sync timer, this could make for an interesting effect and would also remove the issue of the window frame interrupting the composition of images.
- martinmckenna
- Posts: 2714
- Joined: Thu Jun 28, 2007 7:26 pm
- Location: insitu
- Contact:
yes it looks good .
the only problem is how to store and keep the projector . am not a big fan of a hole in wall .even with a cap . However well its done i would think it would be noticeable. It would also limit its use to only when somethings is not hung in front of it . which is not often .
one idea is to hang it from the ceilling on pulleys . so it can be lowered and raised as necessary .or removed as need be . i have no idea how this would work . but i shall give it some thought .
|this could also be used for showing artists films at night using a video projector if they wished . we could have a drive in cinema with radio transmissions for the soundtrack ,that can be picked up on someones radio ,
the only problem is how to store and keep the projector . am not a big fan of a hole in wall .even with a cap . However well its done i would think it would be noticeable. It would also limit its use to only when somethings is not hung in front of it . which is not often .
one idea is to hang it from the ceilling on pulleys . so it can be lowered and raised as necessary .or removed as need be . i have no idea how this would work . but i shall give it some thought .
|this could also be used for showing artists films at night using a video projector if they wished . we could have a drive in cinema with radio transmissions for the soundtrack ,that can be picked up on someones radio ,
So, after all this Chris suddenly tells me that we have two big screens worth of proper rear projection material worth hundreds of quid, lying around in the corner of the hall! One of them almost fits the window as-is and makes the contrast much, much better. Here's the same image up for comparison.
You do not have the required permissions to view the files attached to this post.
Martin/Chris - could the screen in the second photo be turned into a roman blind? The more rings and string you use, the better it bunches when you roll it up. But then it becomes harder to put it to other uses. You would need 4 strings (each end, and 2 in the middle to match the vertical window frames) at a minimum.
Yes, there's companies that will put digital files onto slide film for you for quite cheap. The better ones achieve something like 8000dpi, which means you'll get the entire resolution of even a high-megapixel DSLR image onto the slide, vs a reduction to 1024x768 when you project with a typical digital projector. So slide projectors can be good for digital nerds too!
A roman blind is no good I'm afraid. The supports that go through it would add horizontal lines across the image, and the rear projection material is plasticy stuff that rips easily if you make holes in it. It should be kept as an unblemished sheet. The best way to set this up as a blind is to use a simple roller at the top.
A word of advice to anyone thinking of shooting stuff to be used like this: try to use as much exposure as you can get away with.
It's always been common advice when using slide film to lean towards underexposure when in doubt, because if you overexpose then the highlights blow out completely. I tend to set my meter to about half a stop under because of this.
However, looking at some of my photos on this setup they are just not bright enough. You need to make sure the highlight areas of the developed slides come out pretty much completely transparent to get a good bright image on this screen!
It's always been common advice when using slide film to lean towards underexposure when in doubt, because if you overexpose then the highlights blow out completely. I tend to set my meter to about half a stop under because of this.
However, looking at some of my photos on this setup they are just not bright enough. You need to make sure the highlight areas of the developed slides come out pretty much completely transparent to get a good bright image on this screen!
some projectors (film) have been brought up to the dorkbot crew. if you get them working let us know... cool?
cool!
r
cool!
r
-----
www.ryanvanwinkle.com
www.ryanvanwinkle.com
-
- Posts: 1113
- Joined: Sun Nov 23, 2008 10:16 am
- Location: Edinburgh!
- Contact:
Re: Rear projection after hours in the gallery
This is an amazing idea, can we revive it?
Mike
Dawnsio 'mlaen i'r gwres prynhawn a rwy'n addo erbyn yfori byddai wedi mynd, hwyl fawr i pawb, hwyl fawr i pawb...
Dawnsio 'mlaen i'r gwres prynhawn a rwy'n addo erbyn yfori byddai wedi mynd, hwyl fawr i pawb, hwyl fawr i pawb...
Re: Rear projection after hours in the gallery
We have all the stuff. We've still got slide projectors, I have the 45mm lens stashed away. We also bought all the rope and pulleys needed to set this up for being hoisted up to the roof of the gallery when not in use. These should be in a B&Q bag in the gallery attic. I can give pointers to anyone who wants to work on this, I just can't commit any significant time myself.
- stephengoodall
- Posts: 817
- Joined: Thu Jun 28, 2007 7:29 pm
Re: Rear projection after hours in the gallery
I always liked tjis idea, could be good, esp. when nothing in gallery.
First there is a mountain, then there is no mountain, then there is.
Re: Rear projection after hours in the gallery
Everything about this is impressive
Re: Rear projection after hours in the gallery
This would be great over the blender weekend, lets hope this happens for then
Re: Rear projection after hours in the gallery
Don't hope it happens, someone volunteer to do it.
Re: Rear projection after hours in the gallery
it does look great but it does depend on what show is on in the gallery at the time and if the artist is happy for this to happen. there is a show that is booked already for that weekend in the gallery and mirja is the contact person for the artist involved so a decision would need to go through her. the artist may be fine for this to happen but it may interefere with their idea for the use of the space and we should respect that.
it would be great though. if it could not happen in the gallery could it work in the red room?
it would be great though. if it could not happen in the gallery could it work in the red room?
I saw two shooting stars last night, i wished on them, but they were only satellites.
is it wrong to wish on space hardware?
(Billy Bragg)
is it wrong to wish on space hardware?
(Billy Bragg)